Issue 2 Page 10 of 13
TAPE input
To use the TAPE input, connect external source to the TAPE input (see page 7). Select TAPE input by pressing
the TAPE button so TAPE LED is lit. Selecting the TAPE input can also be achieved by pressing the
corresponding button on the remote handset (see page 8).
BALANCED 1/HT input
To use the BALANCED 1/HT input as a standard input, connect balanced source outputs to the BALANCED
1/HT input XLR sockets (see page 7). Select the BALANCED 1/HT input by pressing the BALANCED 1/HT
button so BALANCED 1/HT LED is lit. Selecting the BALANCED 1/HT input can also be achieved by pressing
the corresponding button on the remote handset (see page 8).
To use the BALANCED 1/HT input as an HT input, move the BAL/HT switch to the HT position. This input is
now unaffected by the volume control, allowing volume control on an external Home Theatre processor to be
used directly. Connect Home theatre or other source outputs to the AUX input XLR sockets (see page 7). Select
BALANCED 1/HT input by pressing the BALANCED 1/HT button so BALANCED 1/HT LED is lit.
IMPORTANT: Take great care when using the input in HT mode. Ensure that the volume control is turned right
down on the HT processor when first setting up. The HT mode is designed for sources which require their own
volume control to be used. Connecting sources in HT mode with no volume control could result in damage to
hearing and/or speakers due to uncontrolled loud sounds.
BALANCED 2 input
To use the BALANCED 2 input, connect balanced source outputs to the BALANCED 2 input XLR sockets (see
page 7). Select the BALANCED 2 input by pressing the BALANCED 2 button so BALANCED 2 LED is lit.
Selecting the BALANCED 2 input can also be achieved by pressing the corresponding button on the remote
handset (see page 8).
TAPE MONITOR button and TAPE OUT
To record to tape, CD recorder, DAT, minidisk or computer soundcard analogue input, connect the tape out to
the recorder line in. Press the input selector button on the front panel or remote control. This source will now be
routed to the M8 PREAMPLIFIER TAPE OUT for recording by tape deck.
The recording can be directly monitored through the loudspeakers by pressing the TAPE MONITOR button so
the TAPE MONITOR LED is lit. Press again to return back to the original input being listened to (and TAPE
MONITOR LED is out again).
On some 3 head tape decks there is an additional tape/source switch which should be in the 'TAPE' position for
this to work. If in doubt, please consult tape deck operating manual.
Note – the M8 PREAMPLIFIER volume control has no effect on the TAPE OUT signal.
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels